|
Model & Part Number
|
PG70ABDL Ultrasonic Precision Thickness Gauge
|
|
Material thickness digits display
|
•
|
|
B-Scan cross sectional display
|
•
|
|
Combined B-Scan and digits display
|
•
|
|
Scan bar display
|
•
|
|
A-Scan display
|
+ Rectified, - Rectified, Full Waveform (RF)
|
|
Measurement Mode
|
PE, IE, Plastic & EE (ThruPaint™)
|
|
Measurement Rate:
Manual
Scan mode
Scan bar display
|
4 readings per second
32 readings per second
6 readings per second
|
|
Measuring Range
|
PE (contact) on steel: 1.000 - 254mm (0.040 - 10.000 inches)
PE (contact) on plastic: from 0.254mm (0.010 inches)
IE on steel: 1.27 - 25.4mm (0.050 - 1.000 inch)
IE on plastic: from 0.127mm (0.005 inches)
EE (contact) on steel: 2.54 - 76.20mm (0.100 - 3.000 inches) - ThruPaint™
EE on steel: 0.15 - 12.70mm (0.006 - 0.500 inches)
|
|
Measurement Accuracy
|
±0.001mm (±0.0001 inch)
|
|
Measurement Resolution
|
user selectable: 0.01mm / 0.001mm (0.001 / 0.0001 inch)
|
|
Velocity Calibration Range
|
1250 - 9,999m/s (0.0492 - 0.3936in/ms)
|
|
Additional Features:
|
|
|
High speed scan mode
|
•
|
|
Differential mode
|
•
|
|
Limit alarm mode
|
•
|
|
Selectable resolution
|
•
|
|
B-Scan display speed
|
15 seconds per screen
|
|
Calibration setups
|
16 factory & 48 user-definable setups transferrable to and from a PC archive
|
|
Gates
|
• PE: 1 gate; IE, Plastic & EE: 1 gate with hold off
• Adjustable threshold
|
|
Pulser type
|
square wave pulser with adjustable pulse width (spike, thin, wide)
|
|
Gain
|
manual or automatic gain control (AGC) with
40dB range (depending on mode selected)
|
|
Timing
|
40MHz with ultra low power 8 bit digitizer
|
|
Data logging
|
• 12,000 readings with waveforms
• grid logging
• Alpha Numeric batch identification
• OBSTRUCT indicates inaccessible locations
|
|
Calibration Options
|
single, two point, velocity & material type
|
|
Transducer Probe Type
|
single element with delay tip, pencil with delay tip & contact probes
|
|
Transducer Frequency Range
|
1 - 20MHz
|
|
Transducer recognition
|
manual - selectable from a list
|
|
V-path / dual path error correction
|
automatic
|
|
Probe zero
|
manual (via integrated probe disk)
|
|
Display
|
1/8" VGA (grayscale), 62 x 45.7mm (2.4 x 1.8inch) viewable area
|
|
Units (selectable)
|
mm or inches
|
|
LED Backlight
|
on / off / auto
|
|
Repeatability / Stability Indicator
|
•
|
|
Battery Type
|
3 x AA alkaline
|
|
Battery Life (approximate)
|
150 hours
|
|
Low Battery Indicator
|
•
|
|
Battery Save Mode
|
auto
|
|
Operating Temperature
|
-10 to 60ºC (14 to 140ºF)
|
|
Size (w x h x d)
|
63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches)
|
|
Weight (including batteries)
|
383g (13.5oz)
|
|
Aluminium case design with gasket sealed
end caps, waterproof membrane keypad
|
•
|
|
Transducer Connector Type
|
LEMO
|
|
RS232 Interface
|
Bi-directional
|
|
Packing List
|
Elcometer NDT PG70ABDL gauge, couplant, carry case, user manual,
test certificate, 3 x AA batteries, software, transfer cable
|
